Epson Tm-t88iv Manual Dip Switch

1. Epson Tm-t88iv Manual Dip Switches
2. Epson Tm-t88iv Manual Dip Switch Manual
3. Epson Tm-t88iv Manual Dip Switch Replacement
4. Epson Tm-t88iv Manual Dip Switch Kit

Manuals and free instruction guides. Find the user manual. Home Support Documentation How to Activate the USB port on an Epson TM-T88V Submitted by webmaster on Wed, - 3:47pm First, the USB port is located under a plate on the back of your printer, to the right of the power connection, held on with a single screw. DIP Switch Tables. Only when DIP Switches 1-7 and 1-8 are on, the transmission speed can be selected from one of seven speeds: 2400, 4800, 9600, 19200, 38400, 57600, and 115200 bps by conrol commands. The default is 38400.1: For USB I/F, DIP Switches 1-3 and 1-4 are Undefined.2: For Parallel I/F, DIP Switch 1-8 is Undefined.

Troubleshooting printers involves identifyingand isolating the problem then applying the solution

1. Tm-t88iv user s manual 1 english english tm-t88iv user s manual dip switch tables and specifications the dip switch tables and technical specifications are at the beginning of this manual. Log-in to our epson partner portal, go to support, then select point of sale. 30 years of ensuring our partners success.
2. Epson Tm-t88iv Programming Manual Epson TM-T88IV Driver, Software, Manual, Download for Windows, Mac OS, and Review, Specs, How to Drivers Install for you, Thanks. TM-T88IV Technical Reference Guide Target model TM-T88IV About Technical Reference Guide This is an explanation manual for developers.

Printer Epson TM-T88IV User Manual. Pos printer (36 pages). If the DIP switch setting is changed after the printer power is turned on, the change does not take. TM-T88IV User’s Manual 1 English English User’s Manual DIP Switch Tables and Specifications The DIP switch tables and technical specifications are at the beginning of this manual. Illustrations All of the illustrations are at the beginning of this manu al. They are identified by letters (A, B, C.). Some of the illustrations have.

Models TM-T88II, TM-T88III
Note: turn off the printer before changing switchsettings.

Switch Bank 1

Switch Bank 2

Model TM-T88IV, TM-T88V

Setting the Memory Switches (TM-T88V, TM-T88VI)

With the “memory switch (customized value),” a software switchfor this printer, you can set the
functions shown in the table below. For an outline of the functions, see thefollowing section.
Use the methods in this table to set the memory switches.

To select a new value hold the feed button down for 1 second ormore.

Note: Be sure to turn the printer off after setting any new value,otherwise the new setting will be lost.

*1: Settingprintermodel isalso availablewiththeTM-T88V PrinterModel Setting Utility.

Setting the paper width
• 80 mm (initial setting)
• 58 mm

Setting the print density

Selectable from levels 1 to 13 (70% ∼ 130%)
Setting the multi-tone print density
Selectable from levels 1 to 13 (70% ∼ 130%)
• For information about how to use the memory switch setting mode, see'Memory Switch Setting Mode'
• For detailed information about the TM-T88V Utility, see the TM-T88VUtility User’s
Manual.
• For detailed information about ESC/POS commands, see the ESC/POSApplication
Programming Guide.
• Be sure to install the roll paper guide when you select the 58 mm paperwidth. (See
'Changing the Paper Width' )
• Once you change the paper width from 80 mm to 58 mm, you cannot change itback to
80 mm.
The print density can be set with DIP switches (2-3/2-4) or the customizedvalue. (See
'Selecting the Print Density (DIP Switches 2-3/2-4)'.) The initial settingof the
customized value is “Depends on the DIP switch settings.” If the customizedvalue is
changed, the value set with the customized value is enabled.
• First change the print density, and then configure the Multi-tone printdensity.
• If you set the density too high, the contrast becomes lower. Select thedensity level
checking the overall tone balance of your image.

Setting the print speed
Selectable from levels 1 to 13 (Slow ∼ Fast) (initial setting: level 13)

Setting font
• Code page: Selectable from 43 pages including user defined page
• International character set: Selectable from 18 sets
• Font A/B replacement

Epson Tm-t88iv Manual Dip Switches

Optional Buzzer
When to sound the buzzer is selectable from the following occasions.
• When an error occurs
• When automatic paper cut activates
• When specified pulse 1 (2 pin) occurs
• When specified pulse 2 (5 pin) occurs

USB Class
• Printer Class
• Vendor Class

Selecting interface mode
Selectable from: automatic selection, fixed to UB interface, or fixed tobuilt-in USB.
Those 3modes are described in both tables below.
For models with serial/parallel UB
For models with other UB

Setting the number of head energizing parts
• One-part energizing (initial setting)
• Two-part energizing
• Four-part energizing

The TM-T88V has dual interfaces: a built-inUSB interface and another interface selected by the customer. (Theselectable interface is referred to as the 'UB' interface.) The table belowdescribes the modes you can set for the printer to control the dualinterfaces.

Interface mode UB Built-in USB
Automatic selection (initial setting) Available Available
Fixed to UB Available Not available
Fixed to built-in USB Not available Available
Interface mode UB Built-in USB
Automatic selection (initial setting) Available Not available
Fixed to UB Available Not available
Fixed to built-in USB Not available Available

Automatic selection:

The interface of either the UB or built-inUSB to which data is transmitted first is selected.
Once the interface is selected, the selection is enabled until the power isturned off or the
printer is reset.
• Usually, the number of head energizing parts does not need to be changed.
• The maximum print speed (300 mm/s) can be performed only when one-partenergizing
is selected.

Setting the power supply unit capacity
Selectable from levels 1 to 3 (Low ∼ High) (initial setting: level 3)

Setting the automatic paper cut
• Not use this function (initial setting)
• Cut paper when the cover is closed
• Print logo when paper is cut

Setting the paper reduction
• Extra upper space reduction: enabled or disabled (initial setting)
• Extra lower space reduction: enabled or disabled (initial setting)
• Line space reduction rate: not reduced (initial setting), 25%, 50%, or 75%
• Line feed reduction rate: not reduced (initial setting), 25%, 50%, or 75%
• Barcode height reduction rate: not reduced (initial setting), 25%, 50%, or 75%

Setting the transmission speed for serial interface
When DIP switches 1-7 and 1-8 are set to ON, the value (initially 38400) can beset to 2400, 4800,
9600, 19200, 38400, 57600, or 115200. (See 'Transmission Speed (DIP Switches1-7/1-8)' on page38.)

Setting the printer model
When you use the TM-T88V with the APD Ver. 4.00 ~ 4.04, you need to change theprinter model
name to “TM-T88IV.”

Changing the Memory Switches - Printer Access Method

To change the memory switch settings on an Epson printer, you will first need torun a self test.

• Turn the printer off
• Hold down the FEED button
• Turn the Printer back on while still holding the FEED button.

• After the self test print is complete, there should still be a lightflashing on the printer.

• Fate of atlantis download mac. To select a new value hold the Feed button down for 1 second or more.

• The next page should be a short menu listing.

• Those options are the memory switch settings.

• Download zip iphone for android. Most options will be under the 'Customize value settings' menu.

The way the menu selection works is by pressing the FEED button the same numberof times as the number next to the option, then pressing and holding the FEED anadditional time after that (i.e. to select the 2nd option in the list, you wouldpress the FEED button 2 times and then press and hold it on the third)

Note: Be sure to shut the printer off after setting any value, otherwisethe new setting will be lost..

For instructions on installing or configuring a Connect-It interface card please choose from the list below:

Epson Tm-t88iv Manual Dip Switch Manual

Epson Tm-t88iv Manual Dip Switch Replacement

Installing the Device Driversfor Windows

Epson Tm-t88iv Manual Dip Switch Kit

To obtain the latest DeviceDrivers from Epson:

1. Download and Install Epson’sdrivers available fromwww.epson.com

2. Click on TECHNICAL RESOURCES

3. Select the printer model under the menu

4. Click the downloaddrivers on the printer page